Professional glass & back fitting machine with 23 dies.
11 deep aluminium dies from 17m to 40mm - to be used at top for fitting deep glass with ring inside. Use at bottom for fitting backs of watches. We would recommend to use a piece of linen or felt on deep dies to protect gold plated watches.
4 flat aluminium dies from 21mm to 42mm - use at top while fitting backs.
4 plastic dies for square watch cases - use at bottom with base die for fitting backs of square watches.
4 plastic dies for round watch cases - use at bottom with base die (optional dies for fitting back of round watch cases).
Base die for use with above plastic dies.
Professional glass fitting machine for fitting watch crystals / glasses & watch casement backs. Complete with link removing attachment and spare pins.
Watch glass fitting machine / case closing press complete with 20 nylon dies & 4 square metal dies. An essential tool for watch repairers when fitting watch backs and crystals
11 Nylon domed dies:
21 x 22mm, 27 x 28mm, 31 x 32mm, 33 x 34mm, 35 x 36mm, 39 x 40mm,
40 x 42.5mm, 45 x 47.5mm, 50 x 52.5mm, 54 x 55mm, 55 x 57mm
9 Nylon flat dies:
24 x 25mm 26 x 27mm, 28 x 29mm, 30 x 31mm, 32 x 33mm, 36 x 37mm, 35mm, 40mm & 45mm.
4 square metal dies:
25mm, 32mm, 38mm, 45mm
Watch glass fitting / case closing machine complete with 12 nylon dies for fitting watch glasses (crystals) and snap on type backs.
Dies sizes range from 21mm to 40mm
6 reversible domed dies & 6 flat dies.
Case closing press complete with 8 threaded nylon dies - for fitting flat mineral glass and backs of quartz watch cases.
Die sizes: 14mm, 20mm, 25mm & 30mm
18 x 16mm, 22 x 20mm, 30 x 28mm & 26 x 24mm.
Mini bench top glass & back press complete with 6 nylon dies for watch crystals & backs (push fit).
2 domed dies - 20mm - 36mm
4 flat dies - 14mm, 28mm, 32mm & 37mm.
Watch glass, mineral crystal, back fitting machine (master jig) supplied with 8 flat nylon dies.
Smallest die: 14mm - largest die 37mm.
Hand held plier for pressing snap on watch backs watch backs and flat crystals into place. Rubber jaws are aligned to ensure maximum efficiency.
Please note that this item is not suitable for domed glasses (crystals) nor screw type backs.
Set of 4 square flat dies to suit Glass fitting / case closing machine / press.
Sizes are: 25mm, 32mm, 38mm & 45mm.
8 large nylon dies to suit WGFM12202 W-WGFM202B.
Size of domed dies: 40-42.5mm, 45-47.5mm, 50-52.5mm, 54-55mm, 56-57mm
Size of flat dies: 35mm, 40mm, 45mm.
Quality watch glass remover, comes complete with plate.
Adjustable jaws opening from 10mm upto 38mm and will fit most ladies and gents watches.
The brass plate holds the watch in place.
100 assorted Mineral watch glasses (crystals). 20 different sizes - 5 of each size - each clearly marked.
30.00 30.50 31.00 31.50 32.00 32.50 33.00 33.50 34.00 34.50 35.00 35.50 36.00 36.50 37.00 37.50 38.00 38.50 39.00 39.50
Assortment of 250 pieces, high dome plastic deluxe plastic watch crystals. There are 25 sizes, 10 pieces per size - (230 - 276)
Micro accurate.
Assortment of 250 pieces, high domed, plastic deluxe watch crystals. 25 sizes in total, 10 pieces per size - 278mm to 324mm.