Clockparts-uk quality clock parts, quartz clock movements, watch tools

High Power Transducer for Superior Cleaning Results

Large Tank Capacity for Professional Cleaning

Isolated-Circuit Design, Keep Water Away for Enhanced Safety

First Ultrasonic Cleaner to Introduce Cooling Fan for Prolonged Operation

Digital ultrasonic cleaner. 5 cleaning cycles, 90 seconds, 180 seconds, 280 seconds, 380 seconds, 480 seconds. 

 

Applications

Professional Cleaning

Great Cleaning Device for Scientific Labs, Medical and Dental Clinics, Electronics Workshops

Hobbyists

Electronics Components, Mechanical Parts, Firearms, Golf Club

Personal Care

Jewellery, Watches Straps and Bands, Glasses, Toothbrushes, Table-ware

The quiet high frequency vibration stimulates the transducer and generates 42,000hz of ultrasonic wave. Can be used with plain water, just put the item to be cleaned into the water place lid onto the CD-4800, then select the desired cleaning cycle and press the "ON" button. For a more deeper clean with watches etc, it is advised to use a ultrasonic cleaning fluid and repeat the required cleaning cycle if necessary.

Specifications

Ultrasonic Frequency	42,000 Hz
Tank Material	Stainless Steel SUS303
Tank Capacity	1,375 ml ( 2.4 pint )
Timer	5 Cycles, with Digital Time Display
Power Supply	AC 100 ~ 120V, 60Hz AC 220 ~ 240V, 50 Hz
Power	60 W ( 110 V ) / 70 W ( 230 V )
Unit Size	230 x 180 x 160 mm ( L x W x H )

240ml of Connoisseurs la Sonic Delicate Formula jewellery cleaner concentrate. 

Specially formulated for use in ultrasonic cleaners to clean silver.  This solution is concentrated and must be mixed with water prior to use.  Measurement guide for ease of use is printed down the side of the bottle.

IMPORTANT: This product is for use on Silver ONLY.

 120ml each of Regular and Delicate la Sonic ultrasonic jewellery cleaner concentrate.

Regular - for use on Diamonds, platinum, gold and precious stones.

Delicate - for use on silver.

IMPORANT: THESE PRODUCTS MUST NOT BE USED ON PEARLS, SEMI-PRECIOUS STONES OR ANY ITEM THAT HAS A SHELLAC FINISH.

A specialist formulation for adding to Ultrasonic baths for cleaning engine parts including carburettors, valves, heat exchangers etc. It safely removes contaminants including general soiling, carbon and grease etc. The cleaning process will not damage, corrode or darken metal components. Safe on brass, aluminium and other sensitive metals.

• Safe to use on all sensitive metals.
• Deep cleans removing dirt and oxidation.
• Excellent stain remover.
• Economical to use.
• For professional and amateur use.

Concentrate is added to water at a rate of 1 part concentrate to 10 parts of water. Operating temperature of bath should be set at 80 degrees centigrade.

After cleaning rinse all surfaces thoroughly with clean water. The bath should be changed regularly when the solution becomes dirty.   

A specialist formulation for adding to Ultrasonic baths for cleaning glass and optical lenses. It safely removes contaminants including general soiling, waxes, buffing compounds, fingerprints and grease etc. and will not damage the glass or any metal parts. Use to restore clarity or as a preparation of surface before applying special coatings.

• Safe to use on all optical items.
• Deep cleans removing dirt and oxidation.
• Excellent stain remover.
• Economical to use.
• For professional and amateur use.

Concentrate is added to water at a rate of 1 part concentrate to 10 parts of water. Operating temperature of bath should be set between 60 and 80 degrees centigrade.

After cleaning rinse all surfaces thoroughly with clean water. The bath should be changed regularly when the solution becomes dirty.   

A specialist formulation for adding to Ultrasonic baths for cleaning jewellery, gemstones and precious metals. It safely removes contaminants including general soiling, oxidation, fingerprints and grease etc. After the cleaning process, rings, necklaces, watchstraps and other jewellery are retored with their natural gleam and lustre.

• Safe to use on all jewellery items.
• Deep cleans removing dirt and oxidation.
• Excellent stain remover.
• Economical to use.
• For professional and amateur use.

Concentrate is added to water at a rate of 1 part concentrate to 10 parts of water. Operating temperature of bath should be set between 20 and 60 degrees centigrade.

After cleaning rinse all surfaces thoroughly with clean water. The bath should be changed regularly when the solution becomes dirty.